FIXTURE MADE IN USA!
COMMERCIAL SPECIFICATION GRADE
Shipping: FREE, In Stock
Certifications: UL Listed (fixture and lamps), NSF, Shatterproof, Contact for Rebate Info
Warranty: 5 years on complete fixture including LED lamps
Included Lamps: (4) Clear flicker-free, shatterproof polycarbonate (imported)
Specifications: Wired lamp holders, luminaire disconnect with 4 connection points for easy daisy chain, 20-gauge cold rolled steel in baked white enamel, 7/8'' conduit knockouts on both ends and top, mirrored aluminum reflector. Clear LED bulbs with internal drivers - no external drivers or ballasts to maintain. You will never have to change anything inside the fixture. PrimeLights® warranties every fixture and every bulb for 5 years. 110v,120v, 240v, 277v. Long lasting, durable, and bright. Made in the USA of American Steel, this is the last light fixture you will ever need!
Color Temperature: 5000K daylight white (call for others)
CRI: 83+
Life: >50,000 Hours
Beam Angle: 120°
Amperage @ 120V: 0.67A / Amperage @ 277V: 0.29A
Base Type: G13 Medium B-Pin
Equivalent Lumens: 23,660 (fluorescent equiv.)
Lamp Lens: Clear
Install Location: Damp Rated – Indoor/Outdoor Covered (no direct water)
Dimming: No (LED with replaceable lamps cannot be installed with dimmer)
LED Driver: Fixture operates without ballast or driver - Each lamp contains an individual driver
Temperature Range: -15° F to 112° F (operation outside range may lower lifespan)
Length: 48.0" Width: 14.0" Depth: 3.5"
Flush mount Install weight (without reflector and lamps): 7.5 lbs
Total weight: 11.25 lbs
Part Number: PL-4SRHBLD88FM
Wiring: Ready for hard wire install, includes quick disconnect wire harness (plug and cord available in accessories)
Mounting Options (Hardware not included)
-Surface mountable (most common): Use screws best for mounting material or toggle bolts
-Hang: Aircraft Cable Hangers available in accessories or use any chain with “s” hooks
*Energy Usage: Approx. 40% Less than T8 Fluorescent
Applications: The PrimeLights® LED Stingray® 4 in clear is the ideal fixture for ceiling heights ranging up to about 15’. Transform your shop to picture perfect daylight with clean, energy efficient, cool running, bright LED four-foot fixtures. Ideal for any size shop including metal buildings, warehouses, fab shops, garages, barns, hobby shops, car restoration, showrooms, and factories just to name a few. Clear LEDs for maximum light. For higher ceilings please see our LED Stingray® 6.
Lighting Layouts: As a rough estimate, change these out 1 for 1 with 250W metal halides, or approx. 1 fixture per 225sf. There are many other factors in deciding the proper light level (mounting height, application / preferred light levels, building reflectivity, etc). For a professional lighting layout, please call customer service. These are no charge and only take a few minutes over the phone. Please be prepared to tell us the following: Height, mounting height, width, depth, reflectivity, and application of the building (to determine proper light levels). Call 512-843-1383.
THE LED STINGRAY® 4 & 6 ARE MANUFACTURED AND SOLD SOLELY BY PRIMELIGHTS®
USD
EUR
