The BOLT – 2 Lamp LED Shop Light – With 90 Minute Emergency Battery Backup

SKU: PL-EBB-BLT44WCL
$169.00
Color:
clear-led-tubes
frosted-led-tubes

FIXTURE MADE IN USA

Buy American Compliant

COMMERCIAL SPECIFICATION GRADE COMPLAINT WITH ANY CODE REQUIRING EMERGENCY BACKUP BATTERY LIGHTS.  THIS USA MADE LIGHT IS IDEAL FOR STORES, WAREHOUSES, BUSINESS'S AND SHOPS THAT REQUIRE A BATTERY BACKUP.

This light comes with an installed emergency battery pack that will kick on in the event of loss of power.  The light will run for and additional 90minutes after power outage.  UL listed and tested thoroughly so you can count on it when you need it most.  

If you are needing the regular version to purchase as well with the Battery version see link for details:

https://www.primelights.com/collections/bolt

 All Lights will come with a battery backup installed.  We do ask that you have a professional or electrician install the lights as the battery will need its own independent power to always remain charged.

Shipping: FREE, In Stock

Certifications: UL Listed (fixture/lamps), NSF, Damp Rated, Shatterproof, Contact for Rebate Info

Warranty: 5 years on complete fixture including LED lamps

Included Lamps: (2) flicker-free, shatterproof polycarbonate and aluminum (imported)

Specifications:

Wired lamp holders, hand removable center cover, luminaire disconnect with 4 connection points for easy daisy chain, 24-gauge cold rolled steel in baked white enamel, 7/8'' conduit knockouts on both ends and 3 on the back.  Included replaceable T8 LED bulbs with internal drivers - no external drivers or ballasts to maintain. You will never have to change anything inside the fixture. Compatible voltage: 110v,120v, 240v, 277v.  PrimeLights warranties every fixture and every bulb for 5 years.

See Product Spec Sheet

Input Wattage: 44W

Voltage: 110-277V (please call for 480v)

LED Lumens: 6,200

Lumens per watt: 155+

Color Temperature: 5000K daylight white (call for others)

CRI: 85+

Life: >50,000 Hours

Beam Angle: 120°

Amperage @ 120V: 0.37A / Amperage @ 277V: 0.16A

Base Type: G13 Medium B-Pin

Equivalent Lumens: 11,780 (fluorescent equivalent)

Lamp Lens: Clear

Dimming: No (LED with replaceable lamps cannot be installed with dimmer)

LED Driver: Fixture operates without ballast or driver - Each lamp contains an individual driver. 

Temperature Range: -15° F to 112° F (operation outside range may lower lifespan)

Length: 48.0"  Width: 4.5"  Depth: 3.5"

Flush mount Install weight (without center cover and lamps): 3.25 lbs

Total weight: 5.5 lbs

Part Number: PL-BOLT4-44W2N

Mounting Options (Hardware not included)

-Surface mountable (most common): Use screws best for mounting material or toggle bolts

-Hang: Aircraft Cable Hangers available in accessories or use any chain with “s” hooks

*Energy Usage: Approx. 70% Less than T5 Fluorescent 

Applications: Replace 8' T12 and 4’ T8 and T5 fluorescent. Use in warehouses, machine shops, pole barns, farms, ranches, auto shops, workshops, airplane hangar, welding, automotive, task lighting, low ceilings, mezzanine, attic, lean to, storage room, above work bench, etc. 

Lighting Layouts: Recommended for ceilings under 14’.  For higher ceilings see the 3 lamp Bolt.  Change these out 1 for 1 with fluorescent strips, or approx 1 fixture per 175sf.  There are many other factors in deciding the proper light level (mounting height, application / preferred light levels, building reflectivity, etc).  For a professional lighting layout, please call customer service.  These are no charge and only take a few minutes over the phone.  Please be prepared to tell us the following: Height, mounting height, width, depth, reflectivity, and application of the building (to determine proper light levels).  Call 512-843-1383.

  •  Sku #: PL-BLT44WCL

 

Cable Hanger Installation

 Cord & Plug Installation

 Occupancy Sensor Installation

 Wire Guard Installation

 

Shipping Policy

Same-day shipping on most orders before 2:00 p.m. All shipments are prepaid to the customer, freight is included in the price shown. PrimeLights guarantees product to arrive in brand new, undamaged condition. If shipping damages occur, please note with the shipper and contact our customer service immediately at support@primelights.com or 512-598-4961. PrimeLights will replace any product damaged in shipping with zero expense to the customer.

Return Policy

PrimeLights will accept returns within 30 days on unused stock products. Buyer will pay freight upon return if PrimeLights is not liable for miss-order. If PrimeLights is liable, PrimeLights will pay freight. If fixtures are used a restocking fee will be applied. Customer satisfaction is our priority and we’re happy to clear up any confusion and issues on the phone. No products will be accepted for return without prior authorization of seller.

We appreciate your business!